for hot-freeform-forging, 25 MPa (~ 25 t) press capacity, lift height 300 mm, lifting speed without load: down: 40 mm/s up: 60 mm/s 7 mm/s working speed, worktable 300 x 200 mm, motor power 4 kW, three-phase 3x400 V, total weight 880 kg (without oil), external dimension (LxWxH): 1200 mm x 750 mm x 2080 mm, basic equipment 1 pair flat dies (approx. 230x130x50 mm).   Serial number #N   Applications: damask free form forging punching, thorning,... flattening, upsetting,...   NEW: Setup mode with slow lifting speed! Easy to use via the second switch on the foot switch.   Advantages: stable steel welding construction of the press frame small required space free positioning end positions (with mm-scale for exact positioning) adjustable hydraulic pressure simple and exact control with foot pedal double-acting hydraulic cylinder high pressing speed large lift height significantly lower noise emission than power hammers quick and easy start up of the machine robust, durable and low ammount of maintenance flexible in use due to lateral insertion (80mm x 180mm) easy and flexible die mounting with T-slots on the press table

  for hot-freeform-forging, 50 MPa (~ 50 t) press capacity, lift height 300 mm, lifting speed without load: down: 50 mm/s, up: 55 mm/s 8 mm/s working speed, worktable 380 x 300 mm, motor power 7,5 kW, three-phase 3x400 V, total weight 1950 kg (without oil), external dimension (LxBxH): 1560 mm x 1110 mm x 2140 mm, basic equipment 1 pair flat dies   Serial number #N   Applications: damask free form forging punching, thorning,... flattening, upsetting,...   Advantages: stable steel welding construction of the press frame small required space free positioning end positions adjustable hydraulic pressure simple and exact control with foot pedal double-acting hydraulic cylinder high pressing speed large lift height significantly lower noise emission than power hammers quick and easy start up of the machine robust, durable and low ammount of maintenance flexible in use due to lateral insertion (80mm x 180mm) easy and flexible die mounting with T-slots on the press table

  suitable for above or below, Dimensions 230x130x50mm, made of hardened tool steel, Combination shape flat / convex (R=75 mm)

  for hydraulic forging press, hardened from tool steel, including drawing creation   Just ask us, we will create an offer and after the order has been approved, the dies will be individually manufactured.

  casing made of aluminium, foot switch-cover prevents unintentional operation, for forging press with one speed level.

  casing made of aluminium, foot switch-cover prevents unintentional operation, for forging press with two speed levels.

  0-400 bar (0-40 MPa)

    Chief cause of damage and malfunction of hydraulic machines is polluted oil. The oil filter ensures that the hydraulic system (pump, valves, pipes) remains free of dirt particles and prevents damage. Replacing the oil filter and hydraulic oil regular ensures a long life and high performance of the system.

    Chief cause of damage and malfunction of hydraulic machines is polluted oil. The oil filter ensures that the hydraulic system (pump, valves, pipes) remains free of dirt particles and prevents damage. Replacing the oil filter and hydraulic oil regular ensures a long life and high performance of the system.

  with integrated temperature gauge   Chief cause of damage and malfunction of hydraulic machines is polluted oil. The oil filter ensures that the hydraulic system (pump, valves, pipes) remains free of dirt particles and prevents damage. Replacing the oil filter and hydraulic oil regular ensures a long life and high performance of the system.

  Length of the sensor approx. 65 mm, Diameter of the sensor approx. 12 mm

  approx. 45x220x15 mm

  approx. 50x260x15 mm

Oil filler filter for forging press AN-Y04

  spacer/ring for elastic coupling, for coupling between hydraulic pump and electric motor   This part should be replaced regularly, depending on wear to avoid damage of the electric motor and hydraulic pump.

  spacer/ring for elastic coupling, for coupling between hydraulic pump and electric motor   This part should be replaced regularly, depending on wear to avoid damage of the electric motor and hydraulic pump.

  wrench size 75 mm, with cross holes for using a lever, for changing the guide block

  wrench size 120 mm, with cross holes for using a lever, for changing the guide block

  Axial piston pump, suitable for hydraulic forging press AN-Y04-25t

  single phase 230 V, 50 Hz, 1,5 kW, with five different rolls, diameters (203, 90, 50, 38, 25 mm), quick and easy adjustable in horizontal / vertical direction, multi-station belt grinder for belts 1220 x 50 mm (2x48"), Belt speed approx. 62 ft/s equals 18 m/s   Mounting foot (350 x 350 mm) for attachment on the floor included, incl. support table "horizontal" and standard support table.     Properties: powerful drive quick tool-free roll change tiltable fast sanding belt change (1220 x 50 mm) Tape rolls: 203, 90, 50, 38, 25 mm incl. support table "horizontal" incl. support table with "recess" adjustable     With the RadiusMaster, we offer a universal belt grinder that was developed by a practitioner for practitioners and is characterized by exceptional versatility. The machine produced in Australia has proven itself for decades - and the details are constantly being improved and optimized.     The Radius Master provides a multitude of uses selected by using an easy to operate index knob. Instantly available is a choice of contact wheel grinding, flat and edge grinding and slack belt grinding. The five contact wheels are brought into position by simply actuating an index knob and rotating in seconds to the desired position. The wheel diameters are 25mm, 38mm, 50mm, 89mm and 203mm. All guards swivel out of position for easy access. The various radii can be easily and quickly brought into the optimal working position with a quick clamp. In addition, the machine can be adjusted in several stages between horizontal and vertical alignment in just a few simple steps.   You can find more videos (in English) on the versatile uses of the Radius Master on the manufacturer's website: https://www.radiusmaster.com.au

  with five different rolls, diameters (203, 90, 50, 38, 25 mm), quick and easy adjustable in horizontal / vertical direction, multi-station belt grinder for belts 1220 x 50 mm (2x48"),   Belt speed: variable Speed - 3.6 to 19.2 m/s (at around 1500 rpm, motor adjustable from 300 to around 1600 rpm)   motor three phase, 50 Hz, 1,5 kW, speed variation with frequency inverter, input single phase 50/60 Hz, 200-240 Volt   livré avec pied simple 350 x 350 mm pour fixation au sol, avec compris table de support "horizontale" et "standard"     Properties: powerful drive quick tool-free roll change tiltable fast sanding belt change (1220 x 50 mm) Tape rolls: 203, 90, 50, 38, 25 mm incl. support table "horizontal" incl. support table with "recess" adjustable     With the RadiusMaster, we offer a universal belt grinder that was developed by a practitioner for practitioners and is characterized by exceptional versatility. The machine produced in Australia has proven itself for decades - and the details are constantly being improved and optimized.     The Radius Master provides a multitude of uses selected by using an easy to operate index knob. Instantly available is a choice of contact wheel grinding, flat and edge grinding and slack belt grinding. The five contact wheels are brought into position by simply actuating an index knob and rotating in seconds to the desired position. The wheel diameters are 25mm, 38mm, 50mm, 89mm and 203mm. All guards swivel out of position for easy access. The various radii can be easily and quickly brought into the optimal working position with a quick clamp. In addition, the machine can be adjusted in several stages between horizontal and vertical alignment in just a few simple steps.   You can find more videos (in English) on the versatile uses of the Radius Master on the manufacturer's website: https://www.radiusmaster.com.au