800H for power hammers SAY-MAK SPH 50 width 38 mm, endless, length ca. 800"  (ca. 2030 mm)

  850H for power hammers SAY-MAK SPH 60 width 50 mm, endless, length ca. 850"  (ca. 2150 mm)

  900H for power hammers SAY-MAK SPH 75 width 50 mm, endless, length ca. 900"  (ca. 2280 mm)

  Ram weight 50 kg, reach 180 mm, free working height 220 mm, stroke rate 240 strokes/min, motor power 5.0 kW, three-phase 3 x 400 volts, total weight 1050 kg, length x width x height: 1289 x 808 x 1768 mm with initial equipment: 1 pair of dies of your choice with motor protection switch and emergency stop switch, Initial equipment: Standard flat dies   100% MADE in Spain   Features: Robust welded construction Smooth operation Sensitive control C-frame with large overhang Adjustable hand guard Automatic lubrication system Internal silencer and oil filter (reduces oil mist) Wide selection of dies Good spare parts availability

  Nargesa offers a wide range of dies. Please contact us directly and we will provide you with a quote. Sold in pairs only.   100% MADE in Spain   Features: High-quality tool steel Hardened

  for hot open-die forging, approx. 21 t press force, stroke height 296 mm, stroke speed without load: 60 mm/s 13 mm/s working speed, worktable area 250 x 260 mm, motor power 2.2 kW, single-phase 230 V, total weight 500 kg (without oil filling), external dimensions (L x W x H): 790 mm x 800 mm x 1940 mm, included with one pair of combination dies as standard equipment   100% MADE in Spain   Features: Sturdy welded construction Robust guide rails: The table is supported by four chrome-plated columns Adjustable limit switches Manual and automatic mode: Two operating modes Plug & Play: The machine is delivered fully assembled and is ready for use immediately after connecting to the power supply. Low maintenance & quiet Tool change: Fast die changes in just 45 seconds. Flexible tools: Self-centering dies can be rotated 90°. A wide range of standard and custom dies is available.

  Nargesa offers a wide range of dies. Please contact us directly and we will provide you with a quote. Sold in pairs only.   100% MADE in Spain   Features: High-quality tool steel Hardened Various variants Base plates for DIY construction

  ram weight 15 kg hit energy 0.16 kJ, horiz. clearance 170 mm, free height of working area 160 mm, number of strokes 300 strokes/min, electric power 2.2 kW, three-phase 3 x 400 Volt, total weight 500 kg, length x width x height: 1180 x 650 x 1575 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

  ram weight 25 kg hit energy 0.27 kJ, horiz. clearance 235 mm, free height of working area 240 mm, number of strokes 250 strokes/min, electric power 3,0 kW, three-phase 3 x 400 Volt, total weight 1040 kg, length x width x height: 1470 x 740 x 1835 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

  ram weight 40 kg hit energy 0.53 kJ, horiz. clearance 270 mm, free height of working area 245 mm, number of strokes 245 strokes/min, electric power 4,0 kW, three-phase 3 x 400 Volt, total weight 1300 kg, length x width x height: 1650 x 800 x 1920 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

  ram weight 55 kg hit energy 0.7 kJ, horiz. clearance 300 mm, free height of working area 270 mm, number of strokes 230 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 1720 kg, length x width x height: 1860 x 880 x 2100 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

  ram weight 75 kg hit energy 1,0 kJ, horiz. clearance 330 mm, free height of working area 297 mm, number of strokes 210 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 2800 kg, length x width x height: 1620 x 930 x 2200 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

  230 Volts, 1-ph., 50 Hz motor power 2,2 kW,  current 17 A. Rated speed 1400 rpm, with motor protection switch, with zero-voltage release, with emergency stop.   Do not connect with a plug but connect fix to the grid and use a circuit braker K25.   You can only order this item if you purchase a new hammer. We will then install the 230V/1-phase motor and deliver the machine to you already converted.

  230 Volts, 1-ph., 50 Hz motor power 2,2 kW,  current 17 A. Rated speed 1400 rpm, with motor protection switch, with zero-voltage release   Do not connect with a plug but connect fix to the grid and use a circuit braker K25.   This article is required if you already have an air hammer and want to convert it.   Scope of delivery: Electric motor Motor protection switch + housing   This item is required if you already have an air hammer and want to convert it.   Do not connect it via a plug, but rather permanently to the power supply and protect it with a K20 or K25 circuit breaker.

  suitable for #Varinfo XX kW, 400V-50Hz, 3-Phases   Original Motor   An energy-efficient three-phase motor according to IEC standards. With its current efficiency class, it is ideal for driving air forging hammers in industrial environments.   Features: Good value for money: A quality product at an attractive price Robust: Lightweight thanks to aluminum housing Easy installation: The terminal box position is variable (top, left, or right) and can be adjusted by simply screwing the feet. High level of safety: Integrated motor protection via PTC thermistors. Durability: Radial shaft seal Versatile: Can also be used for other applications and is suitable for operation with a frequency converter.   Scope of delivery: Motor with ready-to-connect terminal box (including terminal diagram) 2 cable glands Shaft with key   Note: Image similar

  for the wedges of the dies