Pantarol® A metal protection (outdoor) 0,4 l (Spray)
Pantarol® A metal protection (outdoor) 0,4 l (Spray)
colorless, pigment-free anti-corrosion paint based on polyacrylate for weather-resistant, high-gloss protective coatings on metal surfaces (especially for non-ferrous metals).
In order to ensure an elastic metal protective surface outdoors, Pantarol® A uses a resin that can follow the temperature movements of metals and is also UV stable.
Pretreatment: A prerequisite for building up a permanent protective film is a grease, oil and dust-free, shiny metallic surface.
Processing: Apply by brushing or spraying under the following conditions:
Painting: The product is ready to brush
Spraying: Prepare ready to spray with “Thinner for Pantarol® A” No. 131 in a ratio of 2 parts paint and 1 part thinner. Recommended spray viscosity: 15 sec/4 mm DIN (20 °C); at approx. 3-4 bar pressure with a 0.8-1 mm nozzle.
Rollers: An additive is required for roller application to prevent threads from pulling.
Clean the tools immediately after use with “Thinner for Pantarol® A” No. 131.
Drying: Air drying: at 15 - 25°C Dust dry after approx. 15 minutes, hand dry after approx. 30 - 45 Completely dry after approx. 24 hours Oven drying: Completely dry after approx. 1 - 2 hours at elevated temperature (40 - 60°C; up to max. 100°C)
Yield: If the processing recommendations are followed, approx. 8-12 m² of treatment area per liter.
Information on product safety:
- Use only for users familiar with the product.
- Only for the intended purpose.
- Improper use can lead to damage and injury. Please also note the safety instructions included with the product.
Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):
ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com