Pantarol® metal protection (indoor) 0,4 l (Spray)
Pantarol® metal protection (indoor) 0,4 l (Spray)
colorless, pigment-free anti-corrosion paint based on synthetic resin NC for particularly high-quality, high-gloss protective coatings on metal surfaces
Pretreatment: A grease, oil and dust-free, shiny metallic surface is required for the formation of a permanent protective film.
Processing: Apply by brushing, spraying, dipping under the following conditions:
Painting: The product is ready for painting
Spraying: Prepare ready-to-spray with “Thinner for Pantarol®” No. 101 in a ratio of 2 parts paint and 1 part thinner. Recommended spray viscosity: 14-15 sec/4 mm DIN (20°C); advantageous spraying process at approx. 3-4 bar pressure with 1 mm nozzle.
Dipping: If necessary, adjust the product with “Thinner for Pantarol®” No. 101 to a dipping viscosity of 18-22 sec/4mm DIN (20°C).
Clean the tools immediately after use with “Thinner for Pantarol®” No. 101.
Drying: Air drying: at 15-25°C dust dry after a few minutes; hand dry after approx. 30 minutes; completely dry after approx. 2 hours; depending on the layer thickness, ready for packaging after approx. 24 hours; oven drying: ventilate for approx. 10 minutes, baking temperature approx. 80-100°C (130°C must not be exceeded!), baking time approx. 25-30 minutes
Yield: If the processing recommendations are followed, approx. 6 - 8 m² of treatment area per liter.
Information on product safety:
- Use only for users familiar with the product.
- Only for the intended purpose.
- Improper use can lead to damage and injury. Please also note the safety instructions included with the product.
Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):
ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com