Rust Activator 0,5 l (Spray)
€27.00*
% €32.00* (15.63% saved)in stock
Because not all rust is created equal!
Our rust activator is an aqueous liquid that can be used to create a genuine rusty surface on ferrous metal surfaces within a few hours.
It is not a paint or other coating designed to simulate the appearance of rust, but rather a genuine chemical oxidation process.
The activator can be applied by brush, roller, natural sponge, or spray.
Unlike other methods using hydrochloric acid or other household remedies, it is less aggressive, significantly more efficient, and ensures a uniform texture.
Properties:
⦁ Easy to use
⦁ Safe application
⦁ Even surface
⦁ Natural rust appearance
⦁ Rapid rusting
⦁ High yield
Application:
The ideal application temperature is between 13°C and 29°C. (If the surface is too cold or too warm, the rusting process will slow down.)
Apply a test surface to check adhesion, compatibility, and results.
1) Remove scale and grease from the surface.
2) Spray the rust activator onto the metal surface to be rusted.
3) Spray again after 5-10 minutes.
To avoid drip marks, apply the rust activator from the bottom up. Use a damp sponge and gently dab the surface to remove excess.
Then allow the surface to dry completely.
Wear gloves and safety goggles!
Not suitable for stainless steel!
Post-treatment:
Post-treatment can easily be carried out with Owatrol oil. The rust layer should be "consolidated" for this.
Coverage: approx. 10-15 sqm/liter per coat.
Please note the hazard and safety information.
Information on product safety:
- Use only for users familiar with the product.
- Only for the intended purpose.
- Improper use can lead to damage and injury. Please also note the safety instructions included with the product.
Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):
ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com