Skip to main content Skip to search Skip to main navigation
Menu
Description

 

for the safe and easy binding of oxides in the slag,

in a tin can, 1 kg

 

Addition quantity approx. 0.1% by weight

 

 

In the molten state, aluminum, wrought and cast alloys tend not only to form oxide and absorb hydrogen, but also to form undesirable dross and aluminum oxide foam, which has an extremely high metal content. The granules bind oxides and transport them to the surface through a flotation process, where they can easily be skimmed off as slag.

 

Application:

Depending on the amount of melt, approx. 0.1 weight - % is added,

i.e. for 1 kg of melt, approx. 0.001 kg (=1g) is required.

Shortly before pouring, the required amount is carefully stirred into the melt.

After a short reaction time of approx. 1-2 minutes, the "dross" can be skimmed off with a preheated spoon and watering can begin.

Video
product safety

Information on product safety:

  • Use only for users familiar with the product.
  • Only for the intended purpose.
  • Improper use can lead to damage and injury. Please also note the safety instructions included with the product.

Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):

ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com

Video
product safety

Information on product safety:

  • Use only for users familiar with the product.
  • Only for the intended purpose.
  • Improper use can lead to damage and injury. Please also note the safety instructions included with the product.

Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):

ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com

Signal word: WARNING

Hazard and Precautionary Statements

Symbol Code Description
GHS07 H319 Causes serious eye irritation.
P264 Wash thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.