half-hard pitch for driving work 0,5 kg
€26.00*
in stock
as a background for driving work
in cardboard box (approx. ø 7 cm, height 20 cm) at 0.5 kg,
Drop point to Ubbelohde 88 (+-3)
Hardness IH (Zeiss) < 11
Features:
Made in Germany according to a traditional formula
- Easy to work with
- Safe to handle
- An ideal aid for repoussé work on copper sheets and other materials
- Available in various hardness grades
- Ensures results with sharp, precise contours
- Residues can be easily removed from the workpiece
Application:
To embed a workpiece, the pitch is slowly heated until it becomes viscous. The pitch is then pressed into shape and, upon cooling, acquires its stabilizing firmness.
Any residues remaining on the finished workpiece can subsequently be removed by carefully heating the piece with a heat gun or by using solvents.
Which pitch is used for what purpose?
- Soft: For deep repoussé work and large-scale deformations.
- Medium: The standard choice for most repoussé and chasing work.
- Hard: For very fine details and shallow reliefs.
Information on product safety:
- Use only for users familiar with the product.
- Only for the intended purpose.
- Improper use can lead to damage and injury. Please also note the safety instructions included with the product.
Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):
ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com
Information on product safety:
- Use only for users familiar with the product.
- Only for the intended purpose.
- Improper use can lead to damage and injury. Please also note the safety instructions included with the product.
Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):
ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com