Auxiliaries
...finished forging usually means it's far from completely finished:
In the technical field, the parts are still hardened and tempered with hardening powder or hardening oils. They are then preserved, burnished, painted, or oiled to protect against corrosion or achieve a specific optical effect.
We have all the tools you need...
Special cleaner for galvanized surfaces Characteristics: especially suitable for galvanized surfaces ensures ideal adhesion of paint or varnish prevents the paint from peeling off prematurely optimal brightening of old zinc surfaces extreme cleaning power for heavy dirt highly concentrated - long range Removes rust stains, soot, grease, and much more. It is an acidic concentrate for cleaning hot-dip and galvanized surfaces. It removes flux residues and oxidation products such as rust stains, has an active cleaning effect and removes dirt, soot, grease and oil. It passivates and phosphates so that paints adhere better. This process prevents the paint from peeling off prematurely. Application: Dilute the zinc cleaner in a ratio of 1:10 to 1:20 with cold water. Then apply with a brush or brush to the surface to be cleaned, Leave on for about 5 minutes and rinse with clean water. If the soiling is very severe, the process must be repeated. Dry well after cleaning. Notice: Zinc Cleaner Forte must not come into contact with acid-sensitive materials such as marble. When cleaning, always proceed gradually to prevent drying during the exposure time. Carry out a preliminary test in a hidden location.
length approx. 100 mm pack with 25 pieces Slate pencil – a classic – ideal for sketching Advantages: Excellent feel Made of solid slate Harder than comparable pencils, therefore precise lines Easily correctable – erasable Very break-resistant compared to chalk or soapstone No smudging Adjustable tip for fine outlines or broader shading Purely natural product – a special way to sketch
for sharpening/pointing worn slate pencils Features: Specifically designed for slate pencils Enables precise sharpening For sharpening/pointing worn slate pencils Sturdy metal part Body made of plastic From small-scale handcrafted production Made in Germany Background information: This is a "rubbing pencil sharpener", meaning the tip is not cut with a blade as with a regular pencil sharpener, but rather rubbed - just like in the old days.
single piece, with silver lead Pencil to mark any kind of surface even greasy, dirty or wet. Marks are resistant to torch flames and highly visible during welding
pack with 12 pcs, with silver lead Pencil to mark any kind of surface even greasy, dirty or wet. Marks are resistant to torch flames and highly visible during welding
single piece, wood-coated Pencil to mark any kind of surface even greasy, dirty or wet. Marks are resistant to torch flames and highly visible during welding.
pack with 12 pcs, with red lead Pencil to mark any kind of surface even greasy, dirty or wet. Marks are resistant to torch flames and highly visible during welding
marks metal surfaces up to 2000°C / 3632 °F 10x10x100 mm
marks metal surfaces up to 2000°C / 3632 °F 10x10x100 mm
ø 12 mm, length 120 mm perfect for designing and sketches
made of durable brass material 1 pcs lead holder with sharpener inside the push button, with soapstone lead, ø 5,6 mm, length 120 mm Soapstone lead for marking on metal and steel, welding and cutting up to 2.000 °C with a long lasting white, fireproof line, clearly visible even through welding goggles
made of durable brass material Set consisting of: 2 pcs lead holder, each with sharpener inside the push button 5 pcs spare leads red allwriter, ø 5,6 mm, length 120 mm 10 pcs spare leads soapstone , ø 5,6 mm, length 120 mm Red allwriter lead for marking on cold metal, steel and on almost any materials Soapstone lead for marking on metal and steel, welding and cutting up to 2.000 °C with a long lasting white, fireproof line, clearly visible even through welding goggles
pack with 5 pcs ø 5,6 mm, 120 mm length for lead holder (article 617144 or 617145)
pack with 5 pcs ø 5,6 mm, 120 mm length for lead holder (article 617144 or 617145)
pack with 5 pcs ø 5,6 mm, 120 mm length for lead holder (article 617144 or 617145)
Heat-Stik® up to 1200 °C / 2200 °F Marking range: 1800°F to 2200°F (982°C to 1204°C) White-hot surface paint crayon writes on iron, steel castings, ingots, forgings, blooms, billets and high temperature metal alloys Extra-wide hot surface marker lasts longer than competitive hot chalk, for extended writing life Marks are readable even on white-hot steel for instant identification Durable marks will not run, char, flow, discolor, peel or crack Heat-Stik hot surface solid paint crayons are ideal for use when marking extremely hot steel. The marks will not burn off and remain readable and highly visible in all weather conditions.
marking paste 1000 °C / 1832 °F tube of 50 ml, yellow for permanent marking of metall
for professional, industrial use For highly opaque marking of almost any materials such as metal, glass, plastic, stone, carton, tiles, wood Waterproof, quick-drying ink
· Permanent marker and Marker for drill holes combined in one pen · Marker for drill holes tip: extra long (25 mm), thin stainless steel tip with Ø 2 mm for marking drill holes and hard-to-reach areas · Special shaped tip avoids slipping into the steel barrel · Permanent marker tip: round tip 1.5 – 3 mm for marking and writing on almost any material, for example plastic, carton, metal, glass, rubber, wood… · Fadeless, quick drying and waterproof on almost any surfaces · Low smell ink without Xylene / Toluene
