for EE-2 ... EE-7, diameter of the inlet Ø 50 mm,

  with 1 outlet dia. 50 mm for blowers type RD-0 / RD-0V und RE-0/RE-0V, to connect the alu-hose ø 50 mm, with clip, bolts und nuts

  with 1 outlet dia. 50 mm for blowers type ATV125, to connect the alu-hose, with clip, bolts und nuts

  with 1 outlet dia. 50 mm for blowers type EMV133/DMV133, to connect the alu-hose, with clip, bolts und nuts

  with 1 outlet dia. 50 mm for hand-blowers type H-11 to connect the alu-hose with clip, bolts und nuts_x005F_x000D_

  with 1 outlet dia. 50 mm for blowers type RD-10 and RE-10 and SV370, to connect the alu-hose, with clip, bolts und nuts

  with 2 outlets dia. 50 mm for blowers type RD-10 and RE-10, to connect the alu-hose, with clips, bolts und nuts

  for blower type RD-2 with 1 outlet ø 100 mm, to connect alu-hose ø 100 mm, with clip, bolts und nuts

  with 2 outlets dia. 50 mm for blowers type RD-2, to connect the alu-hose, with clips, bolts und nuts

  with 3 outlets dia. 50 mm for blowers type RD-2, to connect the alu-hose, with clips, bolts und nuts

  for blowers type RD-2, with 4 outlets dia. 50 mm to connect the alu-hose, with clips, bolts und nuts

  inner dia. ø 46 mm for blowers type RD-0 and RE-0, for fitting on the blower discharge flange, bolt circle diameter 75 mm

  inner dia. 65 mm for blowers type RD-10 and RE-10, for fitting on the blower discharge flange bolt circle diameter 95 mm

  inner dia. 100 mm for blower type RD-2, for fitting on the blower discharge flange, bolt circle diameter 139 mm

  for blowers type RD-0 or RE-0, for fitting on the blower discharge flange

  for fans type RD-10 and RE-10, necessary when installing the throttle valve type 10 (00328041) in combination with the hose connector 1-50 / 1-50-50

  for fans type RD-10 and RE-10, 2 pcs necessary when installing the throttle valve type 10 (00328041) in combination with the hose connector 1-50 / 1-50-50

  3 plies, inflammable flexible air connection between blower and hearth sole

  3 plies, inflammable flexible air connection between blower and hearth sole

  3 plies, inflammable flexible air connection between blower and hearth sole

  115 mm x 100 mm, thickness= 5mm   This seal is clamped between the fan flange and the nozzle. It compensates for unevenness and ensures that no air escapes on the flange.