for EE-2 ... EE-7, diameter of the inlet Ø 50 mm,

  pair of limitation elements to be set on the fire pan of the type C 10, height over the fire pan 50 mm

  pair of limitation elements to be set on the fire pan of the type C 10, height over the fire pan 90 mm

  pair of limitation elements to be set on the fire pan of the type C 15, height over the fire pan 130 mm

  with 1 outlet dia. 50 mm for blowers type RD-0 / RD-0V und RE-0/RE-0V, to connect the alu-hose ø 50 mm, with clip, bolts und nuts

  with 1 outlet dia. 50 mm for blowers type RD-10 and RE-10 and SV370, to connect the alu-hose, with clip, bolts und nuts

  with 2 outlets dia. 50 mm for blowers type RD-10 and RE-10, to connect the alu-hose, with clips, bolts und nuts

  for blower type RD-2 with 1 outlet ø 100 mm, to connect alu-hose ø 100 mm, with clip, bolts und nuts

  with 2 outlets dia. 50 mm for blowers type RD-2, to connect the alu-hose, with clips, bolts und nuts

  with 3 outlets dia. 50 mm for blowers type RD-2, to connect the alu-hose, with clips, bolts und nuts

  for blowers type RD-2, with 4 outlets dia. 50 mm to connect the alu-hose, with clips, bolts und nuts

  3 plies, inflammable flexible air connection between blower and hearth sole

  3 plies, inflammable flexible air connection between blower and hearth sole

  3 plies, inflammable flexible air connection between blower and hearth sole

  Two-piece, cast iron, valve with handle, body with flange and socket, the latter for inserting a 2" pipe.   Note: The parts are raw castings as shown. The flange is not drilled, and the valve must be adjusted/milled to fit neatly into the body.   Original price in 1991 at Gebrüder Häfliger AG: CHF 248   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  Two-piece, cast iron, valve with handle, body with flange and socket, the latter for inserting a 2½" pipe   Note: The parts are raw castings as shown. The flange is not drilled, and the valve must be adjusted/milled to fit neatly into the body.   Original price in 1991 at Gebrüder Häfliger AG: CHF 268   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  Made of cast iron, with Outer Dieameter ø 135 mm flange and 2 x 75 mm ID sockets, the latter for inserting a 2.5" pipe.   Original price in 1991 from Gebrüder Häfliger AG (with 2 air valves and pipe sections): CHF 784   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.