Airhammer Say-Mak
The high-quality air forging hammers from Say-Mak are manufactured in Turkey and impress with a very good price-performance ratio. They are characterized by a robust welded steel construction and a sensitive control system. The drive is via a low-wear toothed belt, which makes this machine very low-maintenance. The die holder is compatible with the dies of common manufacturers. In addition to air hammers, we also supply all spare parts and common dies for this type of air hammer.
suitable for AN-15 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
suitable for AN-25 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
suitable for AN-40 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
suitable for AN-55 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
by SAY-MAK, ram weight 50 kg anvil weight 300 kg, max. clearance 185 mm, horiz. clearance 300 mm, number of strokes 240 strokes/min, electric power 4 kW, three-phase 3 x 400 Volt, total weight approx. 1100 kg, length 1560 mm, width over all 685 mm, height over all 1445 mm, equipped with 1 pair of dies, mounted on steel base. #Seriennummer
by SAY-MAK, ram weight 60 kg anvil weight 300 kg, max. clearance 220 mm, horiz. clearance 300 mm, number of strokes 220 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 1300 kg, length 1700 mm, width over all 740 mm, height over all 1640 mm, equipped with 1 pair of dies, mounted on steel base.
by SAY-MAK, ram weight 75 kg anvil weight 430 kg, max. clearance 220 mm, horiz. clearance 320 mm, numer of strokes 210 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 1600 kg, length 1850 mm, width over all 780 mm, height over all 1680 mm, equipped with 1 pair of dies, mounted on steel base.
steel, length 130 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
steel, length 130 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
steel, length 130 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
steel, length 150 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
steel, length 130 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
steel, length 112 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
steel, length 130 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
steel, length 150 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
steel, length 150 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
steel, length 150 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
steel C50 suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
suitable for Say-Mak SPH 50 / SPH 60 / SPH 75
for power hammers suitable for Say-Mak SPH 50 and other
