Forging tools
Good tools alone are no guarantee of good work, but they are much more fun to work with because:
Life is too short to work with bad tools!
Like all blacksmithing tools, our tools are extremely robust and will last for generations if used correctly. But here too, care should not be neglected in order to enjoy them for one or more lifetimes.
Set includes: 1x Adjustable Wrench 0-25 mm 1x Adjustable Wrench 0-45 mm 1x Adjustable Wrench 0-64 mm This adjustable wrench, also known as a "French wrench," is ideal as a universal pull wrench. The knurled handle ensures a secure grip. By attaching a piece of tubing, the handle can be extended, thus increasing the leverage. Features: Quick adjustment Infinitely variable adjustment range Very sturdy construction Robust handle Knurled/non-slip handle Chrome-vanadium steel Tip: The double-sided jaws allow you to insert a piece of material with the same cross-section as the material being twisted into one side. This allows you to work with greater leverage without bending the tool. Figure 2 shows the 3 different sizes at a glance.
Uncompromising clamping power in a compact format: This heavy-duty, forged C-clamp secures your workpieces with absolute rigidity and reliability—perfect for demanding metalworking, welding, and assembly tasks. Extremely robust: Heavy-duty, drop-forged, and torsion-resistant frame designed to maintain high clamping pressure over the long term. Precise force transmission: Smooth-running trapezoidal threaded spindle with a sturdy T-handle for effortless, secure tightening. Secure grip: Pivoting pressure pad adapts perfectly to the workpiece. Generous clamping range combined with a deep throat—ideal for precise clamping, even in hard-to-reach areas. Durable surface protection: Tough, hammer-tone finish provides reliable protection against corrosion.
incl. HSS bimetal blade Features: Professional quality Sturdy square tube Rubberized pistol grip Square bolt for blade attachment HSS bimetal blade Quick blade change with wing nut Blade length approx. 300 mm
incl. HSS bimetal blade Features: HSS bimetal Long service life Precise cutting Blade length approx. 300 mm Blade thickness approx. 0.65 mm Blade height approx. 30 mm 24 TPI.
6-piece file set: flat blunt half-round triangular square round flat-pointed Features: with wooden handle 100 mm file length Precision quality Professional quality
Cut 2 Universal workshop file for various materials and purposes. Cut 2 for universal use, such as surface finishing, deburring, and much more. Features: Universally applicable Long service life Good stock removal performance Handle made of impact-resistant plastic Industrial workshop quality
forged, working face polished, length overall 375 mm
600 mm, weight 4 kg with flat surface and round and pointed horn, length overall 600 mm
600 mm, weight 5 kg with flat-bowed surface and round - blunted horn length overall 600 mm
weight aprox. 6 kg with flat-bowed surface and round - blunted horn length overall 700 mm
800 mm, weight approx. 9 kg with flat-bowed surface and round - blunted horn length overall 800 mm
as support for doing repoussé work for sand filling, handmade of best resistant leather, sewed all around on the inside, with press button closing.
Soft pitch for repoussé work Features: Made in Germany according to a traditional formula Easy to work with Safe to handle An ideal aid for repoussé work on copper sheets and other materials Available in various hardness grades Ensures results with sharp, precise contours Residues can be easily removed from the workpiece Application: To embed a workpiece, the pitch is slowly heated until it becomes viscous. The pitch is then pressed into shape and, upon cooling, acquires its stabilizing firmness. Any residues remaining on the finished workpiece can subsequently be removed by carefully heating the piece with a heat gun or by using solvents. Which pitch is used for what purpose? Soft: For deep repoussé work and large-scale deformations. Medium: The standard choice for most repoussé and chasing work. Hard: For very fine details and shallow reliefs.
suitable for anvil holes from approx. 20 mm, approx. 170 mm total length This tool is perfect for clamping workpieces directly onto the anvil. The size of tool is suitable for anvils from 20 kg and shaft clamps securely in the square hole. Workpieces up to a thickness of approx. 40 mm can be clamped.
The set consists: 1x wolf's jaw tong 400 mm (538040) 1x flat tong 400 mm (534040) 1x pick up tong 400 mm (531040) 1x round mouth tong 400 mm (537040) 1x band jaw tong 400 mm (534140) With this forging-tong set you get the most important blacksmithing tongs in one package.
making work easier, flexible handling due to C-frame design. Suitable for various tools (ideal for 20x50 mm), flexible and fast adjustment of the tools. Opening (height) C-frame 100 mm, Baseplate 120x250x15 mm This helper allows various jobs if you are working alone. Finishing, settling, punching and much more ... fast and easy tool change suitable for different tool dimensions minimum tool width 39 mm / maximum tool width 57 mm With square hole for the anvil or mounting through holes in the workbench Flexibel handling due to the design The forge guillotine is supplied without tools and square for the anvil. These are available separately as accessories.
for fixing the guillotine, riveting plate or other tools in the square hole of the anvil, Square 25 x 25 mm, length approx. 60 mm, incl. M10 cylinder head screw
for fixing the guillotine, riveting plate or other tools in the square hole of the anvil, Square 30 x 30 mm, length approx. 60 mm, incl. M10 cylinder head screw
made of C 45, untempered 50x20x150 mm This blank die can be used to make your own tools and dies for the blacksmith guillotine. C45 is easy to forge and you could harden it in water or oil. For further information click the download tab.
made of C 45, untempered 50x20x80 mm This blank die can be used to make your own tools and dies for the blacksmith guillotine. C45 is easy to forge and you could harden it in water or oil. For further information click the download tab.
forged of C 45, hardened 50x20x170 mm The die is hardened on the cutting edge and soft on the other side.
forged of C 45, hardened 50x20x100 mm The die is hardened on the cutting edge and soft on the other side.
forged of C 45, hardened radius ca. 10 mm, 50x20x150 mm The die is hardened on the functional surface and soft on the other side.