raw piece for hammers 0,55 kg
forged from C45,
punched, Surface untreated,
not hardened,
approx. 25 x 25 x 115 mm,
Size of hammer-eye approx 25 x 14 mm
This forged blank is ideal for forging your own hammers.
The raw piece for hammers is perforated and thorned perfectly according to DIN and after grinding or forging only has to be hardened according to your own ideas. (hardening instructions in the download area). Depending on the processing, it may happen that the eye has to be thorned again after forging. For this we recommend our hammer thorn (item no. 518726)
These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards.
...and if you would like to find out more about Peter Reisinger and his family business, you can find further information here:
HYPERLINK "https://angele-shop.com/pages/reisinger".
A photo shows the different sizes in an overview.
Reisinger
In the lower Mühlviertel in beautiful Austria, Peter Reisinger forges high-quality blacksmithing tools for us by master craftsmen...
Information on product safety:
- Use only for users familiar with the product.
- Only for the intended purpose.
- Improper use can lead to damage and injury. Please also note the safety instructions included with the product.
Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):
ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com
Accessories
