for propane gas forge oven gas consumption 0.6...1.2 kg/h, for pressure up to 2.5 bar, as spare part for gas forge oven type P-301 and P-302, with sparking plug, without ball valve

  made of heat-resistant steel, approx. ø 50 mm

  for P 301 + P 302 consisting of piezo-pushbutton for fixation-hole ø 18 mm, ignition cable 300 mm length, ground cable 300 mm length, and connector for ignition plug

  for gas forge propane, total length 225 mm, connection 1/2" distribution disc ø 38 mm, 8 nozzles

  for gas forge natural gas connection 1/2", length 225 mm disc ø 38 mm, 12 nozzles

  for the door of the gas forge furnace P-301/302, Ø 18 mm steel, bright, Total length about 180mm

  for P-301, P-302 and GTO25 as replacement, Format 100x100, thickness 6 mm

  Intake M 14x1,5, Outlet for 8 mm cutting ring, thermocouple M 8 x 1, pressure 50 mbar - 4 bar, thread at push button: M12x0,75

  750 mm, M8x1, CrNi- as a spare part

  thread M14x1,25   image for example

  for fixation hole ø 18 mm connection bullet receptacle ø2,4 mm, front dimension 26 mm

  G 3/8 LH-ÜM x G 3/8 LH-KN, for installation between hose breaking security and gas hose   Prevents dangerous gas mixture formation through a gas non-return valve Stops flashbacks through a flame arrester Interrupts the gas flow through an integrated thermal afterflow stop before a certain temperature is reached Dirt filter protects the gas non-return valve from contamination   Gas forging furnaces must be protected with a flashback arrester in accordance with the professional association requirements of DGUV Regulation 79 (German Statutory Accident Insurance - previously BGV D 34).

  4,0 bar 6,0 kg/h G 3/8 LH-ÜM x G 3/8 LH-KN

  3/8" LH / 3/8" LH   Gas hose for connecting to small pressure regulators and for operating gas ovens.   Please note that the hoses can become porous or brittle over the years and should therefore be checked regularly. We use high-quality hoses from a German manufacturer that meet all safety requirements.

  1/4"RH x 3/8"LH

  12 kg/h, Shell x 3/8" LH-KN with pressure gauge and excess flow device, 35° angled, for gas bottles with Shell thread (FR, BE, CH, RU)

  12 kg/h, combi /3/8"LH, with pressure gauge and excess flow device, 35° angled   For connecting to gas cylinders and regulating the pressure of gas appliances.   Advantages: Combination connection for 5.11 or 33 kg gas cylinders Precise gas pressure regulation Precise adjustment via pressure gauge Long service life EU type-tested UKCA type-tested Including hose rupture protection Max. permissible pressure 16 bar   A wide variety of gas pressure regulators are available online, even on a budget. These are usually "cheaply manufactured" and do not meet European safety requirements or the specifications of professional associations. The "CE" stands for "Chinese Export," and these regulators are not permitted for use and pose a safety risk. Our regulators are produced by a reputable manufacturer who tests the medium-pressure regulators after final assembly. These regulators continue to function reliably even after extended periods of use.

  for gas-regulator spare part for article 71211021 / 71211024 / 151062

  consisting of 4 adaptors, for connection of pressure regulator with German connection to the common gas bottles on the European market   Adapter 1: Italy, Switzerland: AG KLF x  M 10 x 1 male thread Adapter 2: Greece, Italy, Austria and Slovenia: AG KLF x IG Ital.A (W20x1/14lh female thread connection) Adapter 3: England, Finland, Iceland, Norway, Portugal and Sweden: AG KLF x AG Primus (M14 x 1,5 male thread connection) Adapter 4: Belgium, England, France, Ireland, Croatia, Latvia, Luxembourg, Macedonia, Montenegro, Netherlands, Switzerland, Serbia, Slovakia, Slovenia, Spain and the Czech Republic: AG KLF x  W 21.8 x 1/14 LH female thread connection

  between regulator and gas cylinders diameters 18 mm / 7 mm, thickness 2 mm