suitable for AN-15 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

  suitable for AN-25 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

  suitable for AN-40 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

  suitable for AN-55 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

  for airhammer Kuhn up to 40 kg set of shims, 120x20 mm (1...8 mm)

  for airhammer Kuhn >= 50 kg set of shims, 160x25 mm (1...8 mm)

  for Kuhn airhammer K-CF   Technical specifications: Volume (ml): 150 Flow rate (cm³/stroke): 0.5 Media: Oil, petroleum, aerosols and oils with additives Housing: steel, powder-coated Mouthpiece: pointed and hollow/universal mouthpiece Connection thread: for tapered and ball grease nipples, DIN 71412, DIN 3402, for funnel type grease nipples, DIN 3405 Maximum pressure (bar): 150 Dimensions ØxL (mm): 40 x 230 Weight (kg): 0.25

  mineral lubricating oil, suitable for AN, Kuhn, Say-Mak. Also suitable for other powerhammers.     perfect for power forging hammers excellent formation of oil mist very good adhesion good protection against corrosion   This single-grade engine oil with a high viscosity index is made from extremely aging-resistant solvent raffinates as base oil and optimally selected active ingredients. Due to its specific properties, the oil is particularly intended for use in machines under extreme operating conditions.