Forging tools
Good tools alone are no guarantee of good work, but they are much more fun to work with because:
Life is too short to work with bad tools!
Like all blacksmithing tools, our tools are extremely robust and will last for generations if used correctly. But here too, care should not be neglected in order to enjoy them for one or more lifetimes.
0 - 9, DIN 1451 Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases Other dimensions available upon request
0 - 9, DIN 1451 10x10x80 mm, height of numbers 5 mm, recommended for use when marking inox, hardened to HRC 58-60 made in Germany
0 - 9, DIN 1451 Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases Other dimensions available upon request
letters A-Z, DIN 1451 Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases Other dimensions available upon request
letters A-Z, DIN 1451 10x10x80 mm, height of numbers 5 mm recommended for use when marking inox, hardened to HRC 58-60 made in Germany
letters A-Z, DIN 1451 Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases Other dimensions available upon request
Number height approx. 16 mm, approx. 20x20 mm, height approx. 35 mm, M10 thread on the back. Engraving depth approx. 4 mm.
for working at the anvil or at the air hammer, all swages are forged of one piece of best steel
for right hand cutting very low hight, suitable for power hammers, handforged, height 30 mm, length 400 mm
for left hand cutting very low hight, suitable for power hammers, handforged, height 30 mm, length 400 mm.
handforged of one piece of steel very low height, suitable for power hammers, height 25 mm, length 400 mm
handforged of one piece of steel, very low height, suitable for power hammers, height 25 mm, length 400 mm
symmetric, for cutting very low hight, suitable for power hammers, handforged of one piece of steel, height 15 mm, length 400 mm
handforged very low hight, suitable for power hammers, height 40 mm, length 350 mm
handforged very low hight, suitable for power hammers, height 40 mm, length 350 mm
spring swage design, handforged very low hight, suitable for power hammers, height 50 mm, length ~ 400 mm
