Forging tools
Good tools alone are no guarantee of good work, but they are much more fun to work with because:
Life is too short to work with bad tools!
Like all blacksmithing tools, our tools are extremely robust and will last for generations if used correctly. But here too, care should not be neglected in order to enjoy them for one or more lifetimes.
for expanding the eye hole in hammer or axe heads total length approx. 400 mm, cutting edge approx. 18 mm handforged and hardened, made from high quality tool steel 1.2344 Attention: Due to the geometry of the blade edge don't use the punch for splitting.
with dia. 1 mm/2 mm/3 mm/4 mm /5 mm and centre punch dia. 4 mm ground and polished surfaces 6-piece set, in a metal case Manufactured from high-alloy tool steel Fully hardened for maximum impact force transmission Special safety striking head prevents material chipping and deformation Polished surface Rounded edges Gold-colored dip-lacquered finish Meets or exceeds requirements of common standards (e.g., DIN) All metal parts are GS-certified supplied in a metal case Tools comply with DIN 6458
Made of special steel; ground and polished surface. 6-piece set, 150 mm length each, supplied in a metal case. Includes one pin punch each in sizes Ø 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, and 10 mm. For driving out or removing bolts, rivets, cotter pins, or other fasteners from through-holes, or for precisely countersinking the above-mentioned fasteners into the workpiece surface. High-alloy tool steel, fully tempered Special safety impact head prevents material chipping and deformation High-gloss polished using an optimized process - no need for chrome Fully hardened for optimal force transmission Gold-colored dip-coated Rounded edges prevent damage to the workpiece Meets or exceeds the requirements of common standards (e.g., DIN) In a metal case
with diameter 3 mm/4 mm/5 mm/6 mm /8 mm and 10 mm Made of special steel, fully hardened, with a ground and polished surface. 6-piece set; length: 150 mm each; supplied in a metal case. For driving out or removing bolts, rivets, cotter pins, or other fasteners from through-holes, or for precisely countersinking the above-mentioned fasteners into the workpiece surface. Premium tool steel, fully tempered, hardness ≥ 58 HRC Special safety impact head prevents material chipping and deformation High-gloss polished using an optimized process - no need for chrome Fully hardened for optimal force transmission powder coated red Rounded edges prevent damage to the workpiece Meets or exceeds the requirements of common standards (e.g., DIN) In a metal case
Features: 100% MADE in Germany For materials with a hardness of up to 68 HRC For precise marking of a drill point and for guiding the drill tip to prevent wandering Manufactured from high-alloy tool steel Through-hardened for maximum impact force transmission Special safety striking head prevents material chipping and deformation Polished working tip Brazed, precision-ground carbide tip Gold-colored dip-lacquered finish
made of C75, open-die forged, hardened, hardened and ground, Length approx. 170 mm For the robust application! Stable and free-form forged, this center punch is extremely stable. The design ensures optimal handling. Forging and hardening the C75 steel makes these punches very hard and resilient and should the point ever become blunt it can be easily resharpened. Characteristics: hand forged C75 - hard and resilient nicely balanced robust First-class quality from a small German master forge.
Concerted pair of split chisel and punch makes work easier. The change in length due to split and punch compensate each other. The workpiece retains his length and that makes it possible to punch many holes fast and quick.
forged of quality tool steel, approx. 400 x 34 x 20 mm (LxWxH), with holes Ø 4, 5, 6, 8, 10,12 mm, one side counterbored, one side beveled, hardened and tempered Features: Made of tool steel Hardened and tempered Forged handle Precisely machined holes One side countersunk One side chamfered These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality tool steel, approx. 400 x 34 x 20 mm (LxWxH), with square holes 5, 6, 8, 10,12 mm, one side beveled, hardened and tempered Features: Made of tool steel Hardened and tempered Forged handle Precisely machined holes One side countersunk One side chamfered These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, width of cutting edge ca. XX mm Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, width of cutting edge ~ 20 mm, for holes XXxXX mm or ØXX mm Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, for square holes XxX mm Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel, hardened and tempered, sharpened and polished, length about 220 mm, for holes X mm Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel, smoothed, length about 200 mm, square approx. 10x10 - 30x30 mm Features: Forged from hot-work steel Ground and polished Special geometry For drilling square holes Long service life thanks to high-quality tool steel These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel, smoothed, length about 200 mm, Diameter approx. 12 - 32 mm Features: Forged from hot-work steel Ground and polished Special geometry For drilling round holes Long service life thanks to high-quality tool steel These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
handforged from high quality steel, forged, smoothed and polished by hand, Length approx. 120 mm Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
handforged from high quality steel W303, forged diagonal, smoothed and polished by hand Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel, smoothed, length about 280 mm, for punching holes according to DIN. Properties: Forged from hot-work steel Oil-hardened and tempered Ground and polished Long service life Very good heat resistance This forged tool enables easy punching and thorning of blanks according to DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the hammer head are reflected on the different lengths of the thorn. This makes thorning easy and you get the desired eye measurement to match the hammer handles with great repeatability. Figure 2 shows the hammer thorn and a hammer blank forged with it. The hammer blank is not included in the scope of delivery. These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards. ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab.
forged of quality hot work steel, smoothed, length about 450 mm, for punching holes according to DIN. Properties: Forged from hot-work steel Oil-hardened and tempered Ground and polished Long service life Very good heat resistance This forged tool enables simple punching and thorning of blanks in accordance with DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the axe head are reflected on the different lengths of the thorn. This makes it easy to thorn and you get the desired eye measurement to match the standard axe handles with great repeatability. These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards. ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab.
forged of quality hot work steel, smoothed, length about 490 mm, for punching holes according to DIN. Properties: Forged from hot-work steel Oil-hardened and tempered Ground and polished Long service life Very good heat resistance This forged tool enables simple punching and thorning of blanks according to DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the axe head are reflected on the different lengths of the thorn. This makes it easy to thorn and you get the desired eye measurement to match the standard axe handles with great repeatability. These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards. ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab.
forged from C45, punched, Surface untreated, not hardened, approx. XX x XX x XX mm, Size of hammer-eye ca. XX x XX mm This forged blank is ideal for forging your own hammers. The raw piece for hammers is perforated and thorned perfectly according to DIN and after grinding or forging only has to be hardened according to your own ideas. (hardening instructions in the download area). Depending on the processing, it may happen that the eye has to be thorned again after forging. For this we recommend our hammer thorn (item no. 518726) These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards. ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab. A photo shows the different sizes in an overview.